B u s h t o n     M a n u f a c t u r i n g
Got a question? Give us a call: (620) 562-3557
Rebuild Services
Upgrades
At Hawk Woodworking Tools, we take care to provide our customers high quality services personalized for their unique needs. We are available to take your order Monday through Friday between the hours of 8:30am and 5:30pm Central Standard Time. 

We provide a variety of services including:
We can rebuild your saw or other machine for $50 per hour plus parts. You can send in the entire machine or just the parts you need rebuilt like an upper arm. A complete rebuild of a scroll saw usual require 3 hours. If we have to re-machine parts, it can require a little more time. An upper arm rebuild takes 30 minutes. After we examine your tool we will call and tell you what it will cost before we start on the rebuild.
INTEGRATED DC MOTOR FOR ULTRA SAWS
We are now using a custom dc motor that integrates the bearing block and eccentric into the motor which allows for the return of a true counter weight. 

G4 LOWER BLADE HOLDER BRACKET
We now have the replacement lower blade holder bracket assembly, (nose adjust stroke) for the G4 available. This assembly has been redesigned to use a metal spring clip to replace the plastic clip. The blade holder bracket has also been strengthened to prevent the bending and breaking of the fingers that hold the blade holder. This is item #711-0100 for 15.95 plus s/h.









ROUTERSHOP HINGE
We have precision hinges for the RouterSHOP to replace the old piano hinge. This results in the table being easier to set and hold table angle. Item #629-0120 for $7.50 each plus s/h.

Used, Refurbished, and DIS Products
We occasionally get used products as partial exchange for an upgrade to a newer, and usually larger, tool. These used products are cleaned and refurbished. They are then sold at a discounted price, sometimes as much as 50% off. Ask about our used products when you call in or message us on the 'contact us' page!

DIS Products are damaged in shipping. The damaged parts are replaced where possible and the product sold at a discounted price. These make the perfect gift as the damages are almost always cosmetic (slight paint scratches, etc.) in nature. Anything that breaks, we replace or repair. All hawk products come with a 1 year limited liability warranty. 
AC SPEED CONTROLLER REPLACEMENT
DC Motor/Controller upgrade for the old AC variable speed controller of the early VS scroll saws is item #711-1000 at a cost of $350 plus s/h.  

NOTE: We cannot repair or replace either the motor or controller from the AC models. If either is damaged or in need of repairs, both must be replaced. We apologize for the inconvenience