HIGH SPEED BEARINGS are self-aligning for years of trouble free service.
PRECISION MACHINED ALUMINUM FENCES AND TABLE for extremely accurate shaping.
TABLE TILTSUP for simple servicing and changing of cutters
SPLIT BEARING HOUSING allows for cutter shaft removal and replacement by only 4 bolts
STILE JIG for accurate cuts and prevents blowout of the wood.
SAFETY JIG AND FENCE CONSTRUCTION for maximum operator safety even for the inexperienced.
ENCLOSED DRIVES and fully guarded cutters for maximum safety.
MANUAL FEED lets you operate at your own speed.
ALTERNATE BETWEEN THE RAISED PANEL STYLE, RAIL, AND OUTSIDE OF DOOR CUTS without changing any settings.
NOW FINISH THE OUTSIDE OF THE DOOR after it is glued up without a separate machine or changing cutters.
HEAVY DUTY V-BELT DRIVE delivers maximum power to the cutter head for all applications with a single belt.
INDUSTRIAL GRADE 5 HP MOTOR to give years of dependable service.
MAGNETIC SAFETY SWITCH IS STANDARD, this is required by OSHA for commercial applications.
HEAVY GAUGE STEEL BASE designed for years of demanding use.
MADE IN THE USA.
Make your own raised panel, glass panel or flat panel cabinet doors with one machine and all 4 cutter on the machine at all times. You can even make your own interior or exterior raised panel doors for your home.
NOW WITH A FOURTH STATION FOR THE OUTSIDE OF THE DOOR CUT
* The PanelMASTER IV is designed for 3/4 stock thickness. To run the wider stocks require spacers on the bottom style rail and the modification or removal of some guards
CREATE RAISED PANEL DOORS IN MINUTES
HAVE EACH PATTERN THAT YOU USE PRE-LOAD ON A SHAFT FOR QUICK CHANGE FROM ONE TO ANOTHER IN ONLY A FEW MINUTES, NO LONG SETTING PROCESS, BEARINGS STAY WITH THE SHAFT SO IT WILL NOT NEED TIME CONSUMING ADJUSTMENTS
Cutters down between a pair of fences is safer than a standard vertical shaft shaper tool
Cut boards to size
Make rail cuts on sides, top and bottom boards of the frame
Make rail cuts on the top and bottom boards of the frame
Make raised panel/back cut on
Glue the door together
Make the outside door cut
STYLE AND RAIL CUTTER SHAFT
TABLE TILTS UP FOR SIMPLE SERVICING AND CHANGING OF CUTTERS
SPLIT BEARING HOUSING ALLOWS FOR CUTTER SHAFT REMOVAL AND RELACEMENT BY ONLY 4 BOLTS
RAISED PANEL AND COMPLETE DOOR
PRECISION MACHINED TABLE AND FENCES yield accurate cuts every time
NOW FINISH THE OUTSIDE OF THE DOOR AFTER IT IS GLUED UP WITHOUT A SEPERATE MACHINE OR CHANGING CUTTERS
Make your own cabinet doors for your kitchen, bathroom, office, closet, den or any other room in your home. Make crown rail doors without any change to the machine settings. Use raised panel, flat panel or even glass panels in your doors. All in just a few minutes without major machine set up changes.
With the unique horizontal shaft design you have all 4 cutters for a raised panel door on the machine at the same time. No changing cutters or having 4 separate machines using more floor space. Less than 7.5 square feet of space is required.
Make a door in minutes!
ALTERNATE BETWEEN THE RAISED PANEL, STYLE, RAIL AND OUTSIDE OF DOOR CUTS without changing any settings.